RG RX-78-2 Gundam Ver.2.0 Pre-Cut Masking Paper & Etchings Precision Upgrade Kit for Bandai RG 1/144 — Laser-Cut Washi Masking Sticker + Stainless Steel Detail Etchings

What's This Product

Building the Bandai RG RX-78-2 Gundam Ver.2.0 — the 1/144 Real Grade kit that redefined the iconic mobile suit for its 45th anniversary? NEWC Pro Pre-Cut Studio delivers two precision-engineered upgrades designed exclusively for this kit: laser-cut pre-cut masking paper for clean, professional color separation, and stainless steel detail etchings that add micro-scale realism to armor panels, heat sinks, and mechanical surfaces.

This product contains only upgrade accessories — the RG RX-78-2 Ver.2.0 model kit itself is not included.

Laser-Cut Masking Precision

• The pre-cut masking sheet is laser-traced from the actual RG RX-78-2 Ver.2.0 part contours — every mask aligns flawlessly with armor panels, vents, and frame details. Letter-coded sections let you tear and apply without scissors, while the medium-high adhesion washi paper stays secure during spraying and peels off residue-free, revealing razor-sharp color borders.
• Eliminates the most tedious part of Gunpla finishing: hand-cutting masking tape to match complex part shapes. Each section is precision-cut for the exact contours of the Ver.2.0's semi-monocoque frame and armor panels — no measuring, no trimming, just apply and paint.

Stainless Steel Detail Realism

• Replace flat plastic surfaces with precision-etched stainless steel parts. The etching set covers key areas — chest vents, heat sinks, back thrusters, arm armor, and leg panels — transforming the standard RG build with industrial-grade texture and metallic sharpness that plastic alone cannot achieve.
• Each etching piece is engineered to the exact dimensions of the corresponding armor panel, ensuring a seamless fit without modification. The included placement diagram maps every piece to its position on the RG RX-78-2 Ver.2.0.

Seamless Build Integration

• Both upgrades are engineered specifically for the RG RX-78-2 Ver.2.0's part geometry. The masking paper accounts for the kit's semi-monocoque internal frame detail, and each etching piece follows the armor panel contours.
• Whether you're a first-time builder or a seasoned Gunpla finisher, the included guides make application straightforward — no guesswork, no trial and error. The masking paper's letter-coded system and the etching's placement diagram handle the hardest part: knowing where each piece goes.

How to Use

Masking Paper

1. Identify Sections — Use the letter-coded guide to tear along designated lines. Each section corresponds to a specific model part.
2. Apply to Parts — Press masks firmly onto model pieces before spray painting. Ensure full contact with the surface.
3. Paint & Peel — Once paint is fully dry, carefully peel off masks to reveal crisp, professional-grade color separation lines.

Etchings

1. Locate Positions — Follow the included placement diagram to identify where each etching piece goes (chest, heat sinks, back armor, arm/leg panels).
2. Glue Carefully — Apply a small amount of model cement (not included) to the back of each etching piece. Handle small parts with tweezers — edges are sharp. Press firmly into position and allow glue to cure fully.

Frequently Asked Questions

Q: Does this product include the RG RX-78-2 Gundam model kit?

No. This is an upgrade accessory kit only — it contains pre-cut masking paper and/or stainless steel etchings. You need to purchase the Bandai RG 1/144 RX-78-2 Gundam Ver.2.0 model kit separately.

Q: Is this compatible with the original RG RX-78-2 from 2010?

No. These accessories are designed exclusively for the 2024 Ver.2.0 release (item #040). The Ver.2.0 has a completely redesigned internal frame and armor geometry — the original 2010 version uses different part shapes and will not align correctly with these masks and etchings.

Q: Do I need any special tools to use the masking paper?

No special tools beyond your standard spray painting setup. The masking paper is pre-cut and letter-coded — just tear along the lines and apply. You will need spray paint (not included) and a well-ventilated painting area.

Q: What glue should I use for the etchings?

Standard plastic model cement (such as Tamiya Cement or Mr. Cement) works well. Apply a small amount to the back of each etching piece. Handle the small parts with tweezers — the stainless steel edges can be sharp.

Q: Can I use the masking paper with a hand brush instead of spray paint?

The masking paper is designed for spray painting, which provides the cleanest results. Hand brushing over masking paper may cause paint to seep under the edges. If you do hand brush, use thin coats and let each coat dry fully before applying the next.

Q: What areas do the etchings cover?

The etching set includes detail pieces for the chest vents, heat sinks, back armor/thrusters, arm armor panels, and leg armor panels. A placement diagram is included to show exactly where each piece goes on the RG RX-78-2 Ver.2.0.

Q: Is the bundle option worth it compared to buying separately?

The bundle saves you $5 compared to purchasing the masking paper and etchings individually. It's the best value if you plan to use both upgrades — the masking paper handles the paint work while the etchings add the metal detail finishing. If you only need one type of upgrade, individual options are available.

Q: Can I use these accessories on other RG Gundam kits?

No. Both the masking paper and etchings are precision-cut to match the specific part contours of the RG RX-78-2 Ver.2.0 only. They will not align correctly with other RG kits (such as RG Wing Zero, RG Char's Zaku, etc.). Each NEWC Pro Pre-Cut product is kit-specific.

Finished Build: A Gundam Legacy, Refined

See how masking paper and etchings transform the RG RX-78-2 Ver.2.0 into a detail-rich showpiece that honors its iconic 45th anniversary status.